Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- advanced_macro [2020/05/13 15:24] – [Delays] akuhtz
+++ advanced_macro [2023/11/14 09:32] (aktuell) – [Accessory notify - ' Okay, if value = 0 / 1'] akuhtz
@@ Zeile 5: / Zeile 5: @@
 The following sections describe the options of the ''Port Type'' column.
-Some ''Port Type''s have the ''Delay'' column enabled. A delay value is used to wait //before// the step is executed. If you want to add a delay after the step you must use the ''Port Type'' ''Delay''.
+Some ''Port Type''s have the ''Delay'' column enabled. A delay value is used to wait //before// the step is executed. If you want to add a delay before the step you must use the ''Port Type'' ''Delay''.
@@ Zeile 38: / Zeile 38: @@
 The ''Random Delay'' allows to wait for a random delay with a maximum of the configured delay  in this step.
+The ''Ticks'' is a time specification for the waiting time before the action is executed. The basic unit is a macro tick and is 20ms.
 ===== Flag =====
@@ Zeile 76: / Zeile 78: @@
 ===== Accessory notify - ' Okay, if value = 0 / 1' =====
-In the macro below the accessory will always be finished with an error because in step 4 the input 'Servo end left reached' waits until it becomes '1' and some ms later the check in step 6 for the same input with a value = '0' is performed.
+In the macro below the accessory will always be finished with an error because in step 4 the input 24: 'Servo end left reached' waits until it becomes '1' and some ms later the check in step 6 for the same input with a value = '0' is performed. \\
 So the Action should be interpreted as 'Return result Okay, if value = '0' and error otherwise'.